Warehouse and godown space
Storage sheds with the clear height, floor loading and truck access that genuine warehousing requires — from 2,000 sq ft godowns upward.
Commercial property consultants across Pune & PCMC
Logistics, warehousing & industrial occupiers
Industrial property is measured in clear height, floor loading and turning radius, not in photographs. BigSpace places warehousing, fulfilment, cold storage and manufacturing occupiers across Chakan, Bhosari, Talawade, Ranjangaon, Wagholi, Pirangut and the MIDC estates — with the approvals and access verified before you commit.
Occupiers we work with
Logos shown are placeholders pending client consent — replace with real client marks before launch.
Pune's industrial and logistics desk
Approach road width, gate width, turning radius, dock levels, clear height under the beam and the floor's actual load-bearing capacity in tonnes per square metre — these decide whether a shed will work for your operation. None of them appear on a listing, and several cannot be fixed after you sign. We measure them on site.
Our coverage spans Pune's industrial geography: the Chakan and Ranjangaon automotive and manufacturing belt, Bhosari and Chinchwad MIDC, Talawade, Pirangut and Markal, the eastern warehousing corridor through Wagholi, Uruli Devachi and Phursungi, and the Ring Road logistics catchment. We handle warehouses and godowns, ecommerce fulfilment centres, cold storage, pharma and FMCG distribution, industrial sheds, workshops and the office space that sits alongside them.
Why BigSpace
Industrial formats we place
Storage, production, distribution and service — four different technical briefs.
Storage sheds with the clear height, floor loading and truck access that genuine warehousing requires — from 2,000 sq ft godowns upward.
Higher-specification warehousing with racking feasibility, sortation floor area, dock provision and the power for conveyor systems.
Temperature-controlled space with insulation, redundant power and the loading arrangement cold chain integrity depends on.
Manufacturing premises in MIDC and private estates with crane provision, three-phase power and effluent handling where required.
Distribution godowns meeting storage, hygiene and documentation standards, with the access a distribution operation needs.
Auto service, detailing and car wash premises with drainage, water supply, effluent handling and vehicular approach.
Compact storage units for retailers, distributors and businesses needing overflow capacity near the city.
Administrative offices attached to or adjacent to industrial premises, including MIDC estate office space.
Land for lease and purchase in Chakan, Ranjangaon and the surrounding industrial corridor, with title and zoning verified.
Micro-markets
Rent, availability and building quality vary sharply between micro-markets. These are the corridors our desk covers daily.
Configurations
Tell us the size band and we work backwards to carpet area, frontage, power and the buildings that can genuinely deliver it.
Technical due diligence
This is the difference between a listing and a usable property. Every point below is checked on site, not taken from a brochure.
The usable height to the underside of the beam, not the ridge. It decides your racking levels and therefore your storage economics.
Stated in tonnes per square metre. Racked storage and heavy machinery routinely exceed what a general-purpose slab was designed for.
Whether a container trailer can physically reach and enter the premises, including the turning radius at the gate.
Ground-level or dock-height loading, number of docks, and whether dock levellers can be retrofitted.
Sanctioned load, transformer capacity, three-phase availability and DG provision matched to your actual connected load.
Lease terms, transfer permissions and the approvals needed before you occupy an MIDC premises.
Fire NOC, factory licence feasibility and pollution control consent where the process requires it.
For workshops, car washes and any wet process — where the effluent goes and whether that is legally acceptable.
Slab thickness, finish and flatness, which decide whether forklifts and racking can operate safely.
Supply reliability, storage capacity, and the washroom and canteen provision your headcount requires.
Occupier types we serve
Storage, distribution, production and vehicle services across the Pune industrial belt.
How we work
Four stages, one consultant, and a written record of every commercial term discussed.
We take your size, budget, preferred corridors and timeline, then show you what that money actually buys in each micro-market before you visit a single property.
Five to eight options, all physically inspected, all confirmed available, each with real carpet area, all-in monthly cost and the owner's genuine position.
We schedule the visits and run the commercial negotiation — rent, escalation, lock-in, rent-free period and fit-out contribution — from your side of the table.
Leave and licence or lease deed support, stamp duty and registration, snag list and handover, with the same consultant you started with.
Client feedback
Sample copy shown — replace with real, attributable client testimonials before this page goes live.
The clear height on the brochure was the ridge height. Under the beam it was nearly two metres less, which would have cost us an entire racking level across the whole shed.
They drove the approach road with a tape before we visited and told us a trailer could not make the turn. Nobody else had even looked at it.
The MIDC transfer permissions were explained properly upfront. We had been told by another agent it was a formality, and it very much was not.
Commercials & lease terms
Industrial rent is quoted per sq ft per month but driven by specification. A high-clear-height Grade A shed and a low godown are not comparable assets.
Rent per sq ft
Quoted on chargeable area but always converted by us to effective rent on carpet, so two properties can be compared honestly rather than on headline numbers.
Security deposit
Typically three to six months in Pune, negotiable against lease length and the strength of your covenant.
Escalation
Commonly 5% each year or 15% every three years — the choice materially changes your total cost across a five-year term.
Lock-in period
Usually one to three years. We push for a break option wherever your plan is genuinely uncertain.
Rent-free / fit-out period
One to four months is achievable on shell deals and is real money that most occupiers never think to ask for.
CAM and outgoings
Maintenance, property tax, power and HVAC charges, modelled into one all-in monthly figure before you commit to anything.
Indicative guidance only. Actual figures depend on building grade, floor, condition, lease tenure and covenant strength. Ask us for a written benchmark for your exact requirement and corridor — call +91 8793505409.
Questions occupiers ask
It varies sharply by corridor and specification. City-adjacent godowns in Hadapsar, Phursungi and Kothrud command a premium for proximity despite lower specification, while large Grade A sheds in Chakan, Ranjangaon and along the Ring Road corridor are priced on clear height, floor loading and dock provision. We benchmark your specification and corridor rather than quoting a range that would mislead you.
It depends on what you are serving. Chakan and Ranjangaon suit manufacturing and automotive supply chains. Wagholi, Uruli Devachi and Phursungi serve eastern distribution and the Solapur corridor. Bhosari and Talawade suit engineering and light industrial. For last-mile ecommerce serving Pune city, proximity beats specification and city-adjacent godowns win.
For general storage without racking, six metres is workable. For racked storage, nine to twelve metres under the beam is where the economics genuinely improve, because your rent is paid per square foot but your storage is measured in cubic capacity. Always confirm the figure is measured under the beam, not to the ridge.
Yes, though MIDC premises carry their own lease structure, transfer permissions and compliance obligations that differ from private industrial property. These need to be understood before you commit, not discovered during documentation, and we walk you through them.
Yes. Cold storage requires insulated construction, redundant power because a supply failure destroys stock, controlled loading to maintain the cold chain, and appropriate drainage. It is a distinct asset class and we treat it as one.
In practice, specification. A godown is generally smaller, lower, ground-level loaded and used for straightforward storage. A warehouse implies greater clear height, engineered floor loading, dock-height loading and racking capability. The rent difference reflects that, and so should your brief.
Yes, for lease and for purchase across Chakan, Ranjangaon and the surrounding corridor. Zoning, title, access and the availability of power and water are verified before you proceed, since these are the issues that most often derail an industrial land transaction.
Requirements we handle
These are the real briefs that come across our desk. If yours is not listed here, it is still one phone call away from a shortlist.
Areas we cover
Jump straight to the micro-market you are looking at, or call +91 8793505409 and we will shortlist across all of them.
Start with a conversation
One call, one brief, and a shortlist of inspected options within 48 hours. No listing fee, no recycled photographs, no properties that were let last month.
More from BigSpace
Tell us the requirement
Share your brief — area, budget, preferred locality and timeline — and an advisor will send matching options, including off-market ones, within one working day.

Industrial & commercial property consultants
Tell us the requirement. We will shortlist it.
264 live listings · One working day response
Our team will connect with you shortly.